Fabrication Pack¶
The fabrication pack covers the custom non-pressure parts currently defined in the open reference build. It does not claim that the pressure shell, heat-exchanger bundle, compressor internals, or mains-power enclosure are fabrication-ready.
What Is Included¶
| Part | Purpose | Files |
|---|---|---|
| Control panel blank | Generic front panel for gauges, labels, and later cutouts | fabrication/openscad/control_panel_blank.scad, fabrication/stl/control_panel_blank.stl |
| Triple hose separator | Keeps three process lines aligned and serviceable outside the hot pressure boundary | fabrication/openscad/triple_hose_separator.scad, fabrication/stl/triple_hose_separator.stl |
| Blower mount spacer | Raises or levels the compressor/blower base during fit-up | fabrication/openscad/blower_mount_spacer.scad, fabrication/stl/blower_mount_spacer.stl |
| Demister endcap | Non-pressure retainer for a removable demister cartridge concept | fabrication/openscad/demister_endcap.scad, fabrication/stl/demister_endcap.stl |
| Dual cable cleat | Strain-relieved routing for control or low-voltage sensor lines | fabrication/openscad/dual_cable_cleat.scad, fabrication/stl/dual_cable_cleat.stl |
What Is Intentionally Not Included Yet¶
- pressure-shell weldments
- evaporator/condenser tube bundle metal drawings
- gasket specifications for potable certification
- mains-power enclosure cutouts and certified electrical assemblies
- any claim that the current meshes are sufficient for drinking-water deployment
Source Of Truth¶
The editable source files are kept in fabrication/openscad/, while the exported meshes are kept in fabrication/stl/. STL exports can be regenerated with:
Safety Boundary¶
These assets are for brackets, blanks, separators, and retainers. They are not substitutes for pressure-vessel design, high-temperature materials validation, or regulatory compliance.